 |
|
|
Features
These three styles of Rosen NSA Sunvisors cover most low-wing
Piper aircraft to 1996, Later models may have different
mounting brackets, so please don't hesitate to contact us
if you need more information.
Note: There
are several sunvisors for Piper aircraft. Please read all
information carefully before ordering. If you have questions,
please contact our sales office at (580) 327-1565.
|
 |
|
 Part#:
KRPF-300-1
(Center mount or no current visor assembly)
Aircraft Application: (All of the following models
with center mounted factory visors or no factory visors)
PA28 -140, -150, -151, -160, -161, -180, -181, -201T,
-235, -236
PA28S -160, -180
PA28R -180, -200, -201, -201T
PA28RT -201, -201T
PA32 -260, -300, 301, -301T
PA32S -300, -301, -301T
PA32R -300, -301, -301T
PA32RT -300, -300T
PA34 -200, -200T, -220T
PA44 -180, -180T
*For specific applications on above models see special considerations.
Installation
Allow approximately two hours for installation. Requires
installation of 4 rivnuts (included in the kit).
View complete installation instructions: HTML
or printable PDF (requires
Adobe Acrobat Reader download).
STC Information
TC#: A19S0, 2A13, A3S0, A7S0
STC: SA00072SE
View STC papers: HTML or printable
PDF (requires Adobe Acrobat Reader download)
|
Specifications
Approximate lens size: 9" x 14"
Special Considerations
If aircraft was not ewquipped with factory visors, or, if
factory visors mount on a fixed bar at the center of the windshield,
KRPF-300-1 is the correct application.
If aircraft was equipped with factory visors mounted on a
swivel and can be rotated to side window, KRPF-300-2 is the
correct application.
|
|
|
 Part#:
KRPF-300-2
(Swivel stud on the side with no rivnuts)
Aircraft Application: (All of the following models
with existing side mounted factory visors)
PA28 -140, -150, -151, -160, -161, -180, -181, -201T,
-235, -236
PA28S -160, -180
PA28R -180, -200, -201, -201T
PA28RT -201, -201T
PA32 -260, -300, 301, -301T
PA32S -300, -301, -301T
PA32R -300, -301, -301T
PA32RT -300, -300T
PA34 -200, -200T, -220T
PA44 -180, -180T
*For specific applications on above models see special considerations.
Installation
Estimated installation time is 1 hour.
View complete installation instructions: HTML
or printable PDF (requires
Adobe Acrobat Reader download).
STC Information
TC#: A19S0, 2A13, A3S0, A7S0
STC: SA00072SE
View STC papers: HTML or printable
PDF (requires Adobe Acrobat Reader download
|
Specifications
Approximate lens size: 9" x 14"
Special Considerations
If aircraft was equipped with factory visors mounted on a
swivel and can be rotated to side window, KRPF-300-2 is the
correct application.
If aircraft was not equipped with factory visors, or, if
factory visors mount on a fixed bar at the center of the windshield,
KRPF-300-1 is the correct application
|
|
|
 Part#:
KRPF-300-3
(Seneca. Swivel stud on the side with no rivnuts)
Aircraft Application: Seneca - (Does not fit Seneca
V)
PA28 -140, -150, -151, -160, -161, -180, -181, -201T,
-235, -236
PA28S -160, -180
PA28R -180, -200, -201, -201T
PA28RT -201, -201T
PA32 -260, -300, 301, -301T
PA32S -300, -301, -301T
PA32R -300, -301, -301T
PA32RT -300, -300T
PA34 -200, -200T, -220T
PA44 -180, -180T
*For specific applications on above models see special considerations.
Installation
Estimated installation time is 1 hour.
View complete installation instructions: HTML
or printable PDF (requires
Adobe Acrobat Reader download).
STC Information
TC#: A19S0, 2A13, A3S0, A7S0
STC: SA00072SE
View STC papers: HTML or printable
PDF (requires Adobe Acrobat Reader download
|
Specifications
Approximate lens size: 9" x 14"
Special Considerations
Does not fit Seneca V
|
|
