Plane Plastics - interior plastic airplane and helicopter parts

	Print Quote \| Wish List \| Check Out
	Cart: 0 Items $0.00		view cart

Need help? Call 1-866-307-5263

You haven't logged in Login Here

Accessories
Adhesives Carpet Cleaners & Polishes Cosmetics Decals Finishing Materials Hardware Lighting Systems LP Windows Pilot Supplies Sun Visors Shop Supplies Ventilation Shop Cooling Units

INSTALLATION INSTRUCTIONS
FOR
CESSNA 310/340

For Part # RCS-300-6

NOTE: This system will fit only those applications with the original ball joint style visors (Fig 1) that are
mounted with 2 screws. Estimated time 15 min.

Special Considerations: There are several 310 models using a visor mounting block similar to the one in fig. 2. The Rosen visor will not fit these models.

Your new Rosen NSA Sunvisor System is very easy to install. Simply take a Philips screw driver
and remove the present ball joint system.

For Cessna 310's this system will fit only those applications that have original ball joint style equipement as shown above.

Remove both pilots and copilots original visors.

Now take your new Rosen units and attach them in the same nut plates using the 10/32 screw
provided. When mounted across the front of the aircraft, the red thumb screw knob should be
forward.

If your visor mounting holes run fore and aft in relationship to your aircraft, then your swivel should look
:like this when viewed from behind:

If your original mounting holes run sideways to the center line of the aircraft, then the mounting plate
should look as follows in relationship to the swivel:

Every movement of your new Rosen NSA sunvisor is tensionable, so you can adjust it to your liking.

This new visor is the most versatile and best constructed aircraft visor on the market, and we thank you for your patronage.

If there is ever any problem, please call 1-800-2VISORS and we'll be here to help.

Thank you,
Rosen Product Development, Inc.